Solar Smart Inverter 2.5KVA – 12KVA

gold-5kvaMODELS: Gold / Silver series

  • 2.5/ 3.5/ 5 KVA in 48 V DC
  • 2.5 KVA in 72 V DC
  • 5 KVA in 96 V DC
  • 5/ 7.5/ 10 KVA in 120 V DC
  • 10/ 12 KVA in 180 V DC
  • 12 KVA in 192 V DC
  • 15 KVA in 240 V DC

SOLAR PANEL CONNECTED FOR 50 AMPS PWM/MPPT* CHARGE CONTROLLER (MAX.):
800-watt panel per 12VDC

EXCEPT TALIKNG IT DOES EVERYTHING ON ITS OWN

  • FIRST TIME IN INDIA GRID – BY PASS TECHNOLOGY WITH REAL TIME CLOCK optimizes solar usage over Grid and reduces your power bill. Ability to provide rated Output Power directly from Solar Panels (if Solar Power is available) in addition to charges the battery simultaneously.
  • REMOTE CONTROLL You can start and shut down through remote or even through your smart phone.
  • 5 to 10 YEARS BATTERY LIFE Intelligent Battery Charging and Load Sharing using High Performance Advance DSP based Pure Sine Wave Technology and Intelligent battery charging from Solar and Mains by giving priority to Solar Power and only remain power consumes from Mains.
  • MPPT CHARGE CONTROLLER Inbuilt fully regulated PWM/MPPT* (Maximum Power Point Tracking) Charge Controller to get optimum utilization of Solar Power.
  • PURE SINE WAVE protects your all-sensitive gadgets.
  • LONGER LIFE smart inverter is designed for 10 years service life.
  • ALL RUNNING PARAMETERS O YOUR FINGER TIPS through multi color display shows solar usage, battery states, connected load, mains voltage & fault indication.
  • ABILITY TO RUN THE OUTPUT LOAD EXCLUSIVELY through Solar Power, saving Grid Power and your hard earned money.
  • PROVIDES POWER FROM THE BATTERY UPTO 80% CHARGING, when solar and grid power is available and battery is fully charged, resulting save money and save electricity.
  • INTELLIGENT THERMAL MANAGEMENT SYSTEM: Programmed Inbuilt cooling fan, which operates as needed with thermal protection to prevent undue loss of energy.
  • PROVISION TO SET ‘NO CHARGING OF BATTERY FROM MAINS’ (by pressing a button) for Charging through Solar Power Only resulting true power saving.
  • WIRELESS OPERATIONAL MODE (OPTIONAL)
  • Operate on both Solar Power as well as Grid Power.
  • It senses the availability of solar power, grid power and accordingly gives preference to charging thru solar power and switches to the grid power if the solar power is not available.
  • It is designed to give you maximum benefit from the solar energy and minimize your electricity bill drastically.
  • Highly efficient battery charging from the solar energy as a result you will get non-stop power, save money, save electricity and protect the environment.
  • Advanced DSP based technology for absolute and stable and 100% pure sine wave output.
  • Indications for Mains ON, UPS ON, Batt. Low, Charging/ Discharging, Over Load, Short Circuit, Thermal Trip, Solar available/ not available and PV reverse on LCD Display.
  • User- friendly LCD for the display of mode of operation and all parameters.
  • DUAL MODE OF WORKING: UPS and Normal
    • UPS Mode: Fast switching, Input operating range from 180V to 260V.
    • Normal Mode: Wide Input operating range from 100V.
  • Closed Loop Auto Sensing Software Control (ASSC) Smart Battery Charging Technology for longer battery life, while charging either by solar power or grid power.
  • Dual selectable charging current option for Normal Charging and High Charging.
  • Intelligent overload sensing circuitry with auto retries facility.
  • Programmable thermal protection: cooling fan, which operates as needed.
  • High Power new generation MOSFET cable to handle high in-rush/ surge current.
  • Double stage MOSFET Over Current Protection by measuring Rds ON.
  • Highest efficiency at lower cost.
  • Pure Sine Wave Output with low Total Harmonic Distortion (TDH).
  • High End DSP based design of Solar Charge Controller for charging thru Solar Power.
  • Pulse by pulse current limiting with auto-reset resulting in efficient overload and short circuit protection.
  • Eco-friendly operation.
  • Solar PV reverses voltage Protection.
  • Electronic Over Current Charging Protection.
  • Reverse Current Flow Protection from Battery to Solar Panel generally during night.
  • No mechanical contact for charge controller.
  • Designed for continuous reliable and robust operation.

# If solar is available and battery declared as full charged, then Mains will automatic cut till battery discharge upto pre-defined level.

AC MAINS MODE

Input Voltage Range (Normal Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
Input Voltage Range (UPS Mode) 180 to 260 VAC ± VAC
Changeover Time Maximum < 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
Max. Charging Current (NC) 10A + 1A
Max. Charging Current (HC) 14A + 1A
10A + 1A 14.4 ± 0.2 VDC          14.4 ± 0.2 VDC
Float Charging Voltage 13.7 ± 0.2 VDC          27.4 ± 0.4 VDC

BATTERY BACK-UP MODE

Output Voltage at No Load 220 VAC ± 7 VAC
Output Frequency 50.0Hz ± 0.5Hz
Output Wave Form (At No Load) 100% Pure Sine Wave
Battery Low alarm 10.6 ± 0.2 VDC      21.2 ± 0.2 VDC
Battery Low protection 10.4 ± 0.2 VDC      20.8 ± 0.2 VDC
Overload (Normal/ UPS) 120%
Short Circuit (Normal/ UPS) 300%
Battery Low protection 10.4 ± 0.2 VDC per Batt.

CHARGING MODE – SOLAR (MPPT CHARGE CONTROLLER – 40 AMP.)

Max. Charging Current (NC) 29 Amp. ± 1.5Amp.
Max. Charging Current (HC) 32 Amp. ± 1.5Amp.
Charge Controller Efficiency > 98%

MULTI COLOR LCD DISPLAY COLORS

  • Yellow Color: For Inverter/ UPS mode. No AC Mains (Utility Power)
  • Green Color: When AC mains (Utility Power) is available
  • Red Color: In case of any Abnormal Condition

DISPLAYING PARAMETERS

  • AC mains voltage
  • O/P Load in %
  • Battery input voltage
  • Battery Charging/ Discharging current (Bar Graph)
  • Faults Status
    • Overload
    • PV Reverse
    • Short Circuit
    • Fuse Trip
    • Over Temp (Thermometer)
    • Low Battery (Empty ‘Battery’ Blinking)
  • Inverter Status
  • Solar availability Status

PROTECTIONS:

PV Reverse, Reverse Current Flow (to PV module), Battery Voltage Low (4 Auto Retries), Over Load (6 Auto Retries), Battery full Charge, Over Temperature, Short Circuit

LOAD CHART

Application Load Type 2.5KVA 3.5KVA 5KVA 7.5KVA 10KVA 12KVA
Petrol Pumps Fan 1 4 5 5 5
Tube light 5 4 5 8 8
Petrol filling machine 1 2 3 4 5
Schools Fan only 25 30 50 75 100 110
  Fan 15 18 35 55 70 75
  Tube light 13 17 20 35 40 50
Offices AC 1 1 1 2
  Fan            
  Tube Light 13 17 8 12 16 20